Overview:
This module is intended to operate as a device part of the multiplexed network. All inputs and outputs are customer programmable.
COLOR LCD GRAPHIC UNIT WITH 320 X 240 OR 640 X 480 PIXELS AND 15 PUSH-BUTTONS
Technical Characteristics:
- Inputs protected against voltage transients and signal polarity reversal
- Sleep Mode to minimize power consumption when not in use
- Field programmable to occupy any node position in the network
Typical programmable functions:
- Display of Master Switch status
- Display of Oxygen pressure
- Display of Door status
- Display of Load Management and Sequencing functions
- Ammeter 1 and Ammeter 2 for measuring and indicating alternator current
- Battery Voltage measurement and indication
- Outdoor temperature measurement and indication
- Indoor temperature measurement and indication
- Temperature set point selection and control
- Real time clock information
- Up/Down elapsed time controller
- Spare channels for other programmed functions
- Diagnostic functions
- Programming of all variables
- Programmable color, shape and fonts used for icons and variables
- Programming and display of vehicle maintenance reminders
AUDIBLE ALARM
Included to provide alarm tones under customer specified conditions such us:
- Low Oxygen Pressure
- Door Open when vehicle is not in Park
- Data Bus communication errors
- Output overload or short circuit conditions
- Other customer specified logic functions
BACK TO LIQUID CRYSTAL DISPLAY PAGE
|
