8 ANALOG INPUTS
Technical Characteristics:
- Rated at 0 to 18 VDC
- Parameters measured can be calibrated from the display
screens
- Inputs protected against overvoltage and signal polarity
reversal
Typical programmable functions:
- Battery Voltage measurement and indication
- Oxygen pressure measurement and indication
- Outdoor temperature measurement and indication
- Indoor temperature measurement and indication
- Spare channels for other programmed functions
- Ammeter 1 and Ammeter 2 for measuring and indicating alternator current
26 DIGITAL INPUTS
Technical Characteristics:
- 25 outputs with a load capacity of 12A each
- 1 output with a load capacity of 20A
- All outputs can carry their full load simultaneously
- All outputs can operate in the following modes:
- Soft start
- PWM
- Programmable flashing pattern
- ON/OFF
- Time delay ON/OF
- All outputs have customer programmable over-current and short-circuit protection levels
- For all types of faults the controller can be programmed to:
- Automatically make any number of customer-specified attempts to reconnect the load
- Reconnect the load only after the fault has been removed.
Typical programmable functions:
- Control of interior and exterior lights
- Generation of flashing signals and warning lights
- Air conditioning and heating controls
- Load management and sequencing
BACK TO MULTIPLEXED MODULES PAGE |
